Product Introduction
Category:
Safety laser scanner
• Equipped with an External Device Monitoring (EDM) system
• Perform contour monitoring of protected areas
• Up to 8 regional groups
• Equipped with optical cover contamination detection function
- Product Details
- Specification Parameters
- External dimensions
-
I. Principle of the Scanning Area
A laser scanner operates based on the time-of-flight measurement principle. It emits short pulses and simultaneously starts an “electronic stopwatch.” When light strikes an object, it reflects back and is detected by the laser scanner. By measuring the time difference between the emission and reception of the light pulses, the laser scanner can calculate the distance to the object.
II. Protection and Warning Area Setup
The safety laser scanner can easily set up protection zones or alert zones, making it suitable for installation in any location. Although the JP-S02 series is compact in size, it boasts a maximum protection zone of 3 meters and a maximum alert zone of 8 meters.
3. Rapid and convenient regional adjustments
The protection and alarm zones can be flexibly adapted to the on-site environmental conditions around the machine. When environmental conditions change, the scanner can be quickly adjusted by reconfiguration.
IV. Non-Contact Protective Function
Alternative to safety mats—The functional principle of laser scanners does not rely on physical force to detect objects. Falling objects (such as tools or workpieces) will not damage the protective device, thereby reducing downtime and equipment maintenance time.
-
Model JP-S02 Scanning detection capability Type Minimum Typical Maximum Minimum detection resolution 30mm, 40mm, 50mm, 70mm, 150mm Maximum protection area When the resolution is 30 mm 1.25 m When the resolution is 40mm 1.60 m When the resolution is 50mm 2.10 m When the resolution is 70/150 mm. 3.00 m Maximum scanning angle 270° Reflectance (for the protected area) 1.80% 100% Angular resolution 0.5° Response time 80ms (2 scans) 640 ms (16 scans) Additional safety distance 100 mm Warning Area 8 m Distance measurement range 30 m Light source Launcher type Pulse laser diode Wavelength 905 nm Spot size at a scanning range of 2.0 m <28 mm Laser protection level Laser Class 1 OSSD output Output pair 1 pair (maximum load capacity 500mA, residual voltage less than 2.5V) Safety-related I/O Static/Dynamic Input Quantity 4 of them Non-Safety-Related I/O General-purpose input/output count 6 pieces Power supply Power supply voltage 24VDC ±10% Power consumption <10W Environmental adaptation parameters Enclosure protection IP 65 Working environment temperature 10 °C 50 °C Storage temperature range 25 °C
25 °C
50 °C
70 °C (≤24h)
Working relative humidity 35% 85% Storage relative humidity 35% 95% Vibration 10–55 Hz, 0.7 mm combined amplitude, with 20 frequency sweeps each in the X, Y, and Z directions. Impact A 100 m/s² (approximately 10G) pulse lasting 16 ms, with 20 sweeps each in the X, Y, and Z directions. -
Model: JP-S02 Series
Keywords:
Sensor
Measurement sensor
Measuring instrument
Visual system
Communication
Recommended Products
If you have any questions or would like to learn more details, please contact us!
Address: No. 36, Moganshan Road, Beilun District, Ningbo City, Zhejiang Province
Phone:+86-574-82822433 / (400)8679286
Fax:+86-574-88137049
Email:office@ejanpos.com